Red LED rapidly flashes, then pauses, repeats. Red LED, 0.25 seconds/flash How to Activate Non-Timing Operation: Use Program Box to set items ?4A: Boost Timing? and ?5A Turbo Timing? to zero. How to Activate Non-Timing Operation: Use Program Box to set Mode to 'Zero Timing' then set Boost Timing, Turbo Timing, Softening Value and Softening Range to zero. Red LED, 0.31 seconds/flashĪctivate non-timing w/program box to Profile 2. Always in no timing mode.Īctivate non-timing w/program box to Profile 2. Non Timing: Use program box to set items '4A:Boost Timing' and '5A Turbo Timing' to zero Non-Timing: Use LCD Program card to set 'D1:Boost Timing' to zero: 'E1: Turbo Timing' to zero. Also, if the ESC is at any advancement in timing the LED will be solid greenīlue LED 0.66 seconds/flash. Zero timing - the RED LED Flashes when the ESC is active and throttle in neutral position.Ī blinking green LED will be displayed when the ESC is at 0 (zero) degrees of timing and the throttle is at neutral. No high speed timing is allowed to set with PC-software. Modes 6-9 have high speed timing, no LED blinking. Users must use Mode 0-5 after factory reset or after delivery. Yellow, Red, and Green blink fast and at the same time in neutral position when the zero mode is active Use programming box to set 'Boost Timing' and Turbo Timing' to zeroĪlways in non-timing mode.

Yellow LED 0.18 seconds/flash How to Activate Non-Timing Operation: Use Castle Link PC program and USB adapter to disableīlue LED flashes when throttle is at neutral in zero-timing mode.īlue LED 0.66 seconds/flash How to Activate Non-Timing Operation: Use Program Card to set 'G5: RACE MODE' to 'Stock', or set 'T1: BOOST TIMING' and 'T4: TURBO TIMING' to 0deg.īlue LED 0.66 seconds/flash How to Activate Non-Timing Operation: Use Program Card to set Yellow LED 0.39 seconds/flash How to Activate Non-Timing Operation: Use Castle Link PC program and USB adapter to select Has a blinking blue light when the throttle is in neutral and when set to the no-timing profile #1 How to activate non-timing operation: Select Blinky Mode with program box.īlue LED, 0.60 seconds/flash How to Activate Non-Timing Operation: Use Program Box to activate BLINKY MODE. Non-Timing Operation: See Technical detailsīlue LED 0.60 seconds/flash How to Activate Non-Timing Operation: Use Programmer to activate BLINKY MODE.īlue Flashing LED 0.6 sec/flash. This ESC may NOT be used with the Sanwa/Airtronics RX-472 Receiver. Green LED 0.42 seconds/flash Use Programming Box to set Boost Timing and Turbo Timing to 0deg.

Turnigy trackstar 80a turbo esc manual